Installation Manual

Error # Single
Phase
Error # Three
Phase
LCD
Message
Description Troubleshooting
WARNING!
ELECTRICAL SHOCK HAZARD. Do
not touch uninsulated wires when the
inverter cover is removed.
RISQUE D’ÉLECTROCUTION, ne
touchez pas les fils non isolés lorsque le
couvercle de l'onduleur est retiré.
Only a qualified technician should handle this problem, and
only after taking proper precautions.
1. Turn the inverter ON/OFF switch to OFF.
2. Wait five minutes for the input capacitors to discharge.
3. Disconnect the AC breaker.
4. Disconnect the DC inputs.
5. Connect each DC string separately, turn the AC and the
inverter ON/OFF switch to ON, until the error appears for the
faulty string.
o
Do not connect strings with a grounding fault to the
inverter.
o
For further documentation about possible ground
current error sources and solutions, contact SolarEdge
Support.
o
A certified installer must fix the faulty string before
connecting it to the inverter.
Error Codes
SolarEdge-Installation Guide MAN-01-00002-4.0
88