Install Manual
Table Of Contents
- Disclaimers
- Revision History
- Support and Contact Information
- Contents
- HANDLING AND SAFETY INSTRUCTIONS
- IMPORTANT SAFETY INSTRUCTIONS
- Chapter 1: Introducing the SolarEdge Power Harvesting System
- Chapter 2: Installing the Power Optimisers
- Chapter 3: Installing the Inverter
- Chapter 4: Connecting the AC and the Strings to the Safety Switch
- Chapter 5: Activating, Commissioning and Configuring the System Using the Inverter SetApp
- Chapter 6: Setting Up Communication
- Appendix A: Errors and Troubleshooting
- Appendix B: Mechanical Specifications
- Appendix C: Replacing and Adding System Components
- Technical Specifications - Single Phase Inverters with HD-Wave Technology (No...
Technical Specifications - Single Phase Inverters with HD-Wave Technology (North America)
SolarEdge-Single Phase Inverter with HD-Wave Technology Installation MAN-01-00541-1.0
66
SE3000H-US SE3800H-US SE5000H-US SE6000H-US SE7600H-US SE10000H-US SE11400H-US Unit
-40 to +140
1
/-40 to +60 °F/ °C
NEMA 4X (Inverter with Safety Switch)
Operating Temperature Range
Protection Rating
Recommended OCPD size per grid:w
Inverter Maximum Output Current (A) Minimum Fuse Rating (A) Maximum Fuse Rating (A)
SE3000H-US 12.5 20 50
SE3800H-US 16 20 50
SE5000H-US 21 30 50
SE6000H-US 25 35 50
SE7600H-US 32 40 50
SE10000H-US 42 60 80
SE11400H-US 47.5 60 80
1
Full power up to at least 50° C / 122° F. For power de-rating information refer to: https://www.solaredge.com/sites/default/files/se-temperature-derating-note-na.pdf