Solarland SLB-0119 install manual

ManualsBrandsSolarland USA ManualsWind and Solar EnergySolarland SLB-0119 Side of Pole Solar Clamp Mount for Solarland SLP003-5 Solar Modules

® ®

The Solarland SLB-0119 mounting kit has been specifically design for use with the Solarland SLP Series

3W – 5W panels. This mount is a fixed.

Universal Flat Mount Bracket Kit

SLB-0119

Installation Manual

Step1.

Attach the PV module to the mounting bracket using

the clamp, bolts, washers and lock washers

provided. We suggest you lubricate all nuts and

bolts to facilitate easy removal at a later date.

Step2.

For pole mounting, use U bolts or steel

clamps to fix the PV module and mount

assembly to the pole.

See figure 1. The tilt

angle of the PV is situated at 40° to the

horizon. The U-Bolts and/or steel clamps are

not included in the kit.

Components And Parts

figure 2

figure 1

Note:

For vertical wall mounting, drill holes on the

mounting place to be installed according to size of

the fixed bracket. Embed two molly bolts into the

mounting surface.

See figure 2.

Use washers and, lock washers and nuts to secure

the PV module and mount assembly to the wall

surface.

Clamp

5052Al

Component

Material

Quantity

Part 1-2

Module Bolt(M6)

AISI304

Component

Material

Quantity

Part 1-3

5052Al

Component

Material

Quantity

Part 1-1

Part

Part 1-1

Part 1-2

Part 1-3

Part 1-2

Part 1-3

Part 1-1

Fixed Bracket