SDS

Safety Data Sheet
according to Regulation (EC) No 1907/2006 (REACH)
Trade name: Solder-It
Product No: Print date:
Version: 2.4 / EN Page 4 of 10 Revision date: 5.12.2014
____________________________________________________________________________________________________________________________
SECTION 5: Firefighting measures
5.1 Extinguishing media:
Suitable extinguishing media: Use water spray, alcohol-resistant foam, dry chemical or carbon
dioxide.
5.2 Special hazards arising from the substance or mixture
Hazardous combustion products: Hydrogen chloride gas, Zinc/zinc oxides.
5.3 Advice for fire-fighters:
Wear self-contained breathing apparatus for firefighting if necessary.
5.4 Additional information:
No data available.
______________________________________________________________________________________________________________
SECTION 6: Accidental release measures
6.1 Personal precautions, protective equipment and emergency procedures
6.1.1 For non-emergency personnel
Protective equipment: Use persona protective equipment. Avoid dust formation. Avoid
breathing vapours, mist or gas. Ensure adequate ventilation. Evacuate personnel to safe areas.
Avoid breathing dust.
6.2 Environmental precautions:
6.3 Methods and material for containment and cleaning up
6.3.1 For containment: Keep in suitable, closed containers.
6.3.2 For cleaning up: Pick up and arrange disposal without creating dust. Sweep up and shovel.
6.4 Reference to other sections: For disposal see section 13.
___________________________________________________________________________________________________________________________
SECTION 7: Handling and storage
7.1 Precautions for safe handling: Avoid contact with skin and eyes. Avoid formation of dust and
aerosols. Further processing of solid materials may result in the formation of combustible dusts.
Provide appropriate exhaust ventilation at places where dust may form.
For precautions, see section 2.2.