Manual

POWERUP
Whenpower isconnectedto the Ellipticalthe consolewill automaticallypower up.These
modelsareconnecteddirectlyto 115VACandthere isapowerswitchlocatedwherethe line
cordplugs into the unit onthe left sidenearthe front (Seepage5 for location).
Whenit isfirst poweredon,the consolewill performaninternalself-test.Duringthistime all the
lightswill turn on.When the lights go off,the dot matrixdisplaywill showasoftwareversion
(i.e.:VER1.0)andthe messagewindow will displayanodometer reading.Theodometer reading
displayshow manyhoursthe elliptical hasbeenusedand how manyvirtual milesthe elliptical
hasgone.Thetime in hourswill beto the left and the odometerin mileswill bedisplayedto the
right.
Theodometerwill remaindisplayedfor only afew secondsthen the consolewill goto the start
updisplay.Thedot matrixdisplaywill bescrollingthrough the differentworkout profilesand
the messagewindowwill bescrollingthe start up message.Youmaynow beginto usethe
console.
!!ATTENTION
Yournewelliptical consolecomesconfigured inan in-store'displaymode'of operation,where
the consolewill remainpoweredon unlessthe mainpower switchisturned off.Toexitthe
displaymode,for normaloperation,pressand holdthe Stop, Enter and Display keys for five
seconds; the display will show: Display Mode =ON. Use the speed Up key to change the setting
to OFF then press Enter
CONSOLEOPERATION
QUICK START
This is the quickest way to start a workout. After the console
powers up you just press the Start key to begin, this will
initiate the Quick Start mode. In Quick Start the Time will
count up from zero and the workload and the resistance and
incline may be adjusted manually by pressing the Ramp and
Level Up or Down buttons.The dot matrix display will be
showing a track with a blinking dot indicating your progress
as it travels around the track.
21 E25 / E35 ELLIPTICAL