Manual

SEI LYSTr 2

15o

150

• i

#152. 5/16"x3/4"

Button Head Socket

Bolts (4 pcs)

#75. Safety Key

1. Attach the Support tube (15) between the upright tubes (4 & 5) with four

Button Head Socket Bolts (159). Tighten bolts firmly.

2. Place the Beverage Holder (158) on top of the Support tube (26) as shown in

the illustration.

3. Place the magnet of the safety key (75) in between the Start and Stop

buttons (if it isn't already attached). The treadmill will not function without this

in place.

4. Check to make sure all bolts and screws are completely tightened.

62 120

Attach the Console mast covers (62 & 63) to the Frame Base (2) with six

Tapping Screws (120). Tighten screws using the Combination M5 Allen

Wrench & Phillips Head Screw Driver (131).

#120. 5x16mm

Tapping Screws(6 pcs)

11 FSO / F83 / F85 TREADMILL