For Outdoor Use Installation, Operation, Maintenance & Parts Guide Models: SO261BQTR, SO301BQRRL, SO321BQRTRL, SO381BQRTRL, SO421BQRL These grills are tested and certified to the ANSI-Z21.58/CSA 1.6.standards This manual was updated in January 2014 For the latest product information visit the website Owner’s Manual www.solegourmet.
0
Contents For Your Safety ................................................................................................................................ 2 Important Safety Rules ................................................................................................................... 3 Gas Connections ............................................................................................................................. 3 Installation Location & Clearances ....................................
For Your Safety FOR YOUR SAFETY !! WARNING !! If You Smell Gas: 1. 2. 3. 4. Read the Lighting Instructions in this manual before lighting this appliance. Shut off gas to the appliance Extinguish any open flames Open the lid If odor persists, immediately call your gas supplier TESTED IN ACCORDANCE WITH ANSI STANDARD FOR OUTDOOR COOKING GAS APPLIANCES. THIS GRILL IS FOR OUTDOOR USE ONLY! FOR YOUR SAFETY Check your local building codes for the proper method of installation.
Important Safety Rules It is important to follow these rules to avoid fire hazard, property damage or bodily injury from improper installation or usage of the grill. For safety, READ all rules carefully and check local codes. It is prohibited to install the grill in recreational vehicles/mobile homes, trailers, boats, etc. The grill is for outdoor installation and use only. Ensure proper installation by following the installation instructions.
Installation Location Choose a location where the flow of air on the front of the grill is not obstructed. Due to high temperatures, place the grill out of traffic and keep away from clothing, furniture, etc. Keep the gas line connection as short as possible. Do not install in recreational vehicles/mobile homes, trailers, boats, etc.
Build-in Specifications SO301BQRRL, SO421BQRL 6” Non-Combustible Clearance 15” Combustible Clearance from Grill Model SO301BQRRL SO421BQRL W1 33 ¼” 45 ¼” D1 20” 20” D2* 6” 6” H 11” 11” SW** 6 ½” 6 ½” *Non-Combustible **E & G = Electrical & Gas Supply requiring 3 ½” depth clearances ***Applies to Left & Right Side 5 SH** 4 ½” 4 ½” C*** ¾” ¾” V*** Varies w/Overhang Varies w/Overhang
Build-in Specifications SO261BQTR, SO321BQRTRL, SO381BQRTRL 6” Non-Combustible Clearance 15” Combustible Clearance from Grill Model SO261BQTR SO321BQRTRL SO381BQRTRL W1 24 ½” 30 ½” 38 ½” D1 21 ½” 21 ½” 21 ½” D2* 6” 6” 6” *6” Non-Combustible **E & G Electrical & Gas Supply Requiring 3 ½” Depth Clearances 6 H 9 ½” 9 ½” 9 ½” SW** 6 ½” 6 ½” 6 ½” SH** 4 ½” 4 ½” 4 ½”
Electrical Connections Electrical outlet for the Rotisserie motor can be installed on the left side or right side of the grill. The outdoor cooking gas appliance, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.1. Keep any electrical supply cord and fuel supply hose away from any heated surface.
Fuel Conversion (Regulator) *This should only be performed by a licensed gas professional* Currently all Solé grills are supplied with an LP orifice conversion kit and one NG/LP convertible regulator. When converting the gas orifices you must also convert the regulator by removing the large nut on the top of the regulator, remove the plastic plunger, flip it over to the desired fuel, and reinstall the cap. Tighten the cap and the regulator has been converted.
Fuel Conversion (Burners) 1. Determine the existing gas type. (LP or Natural gas) Changing the gas type and orifice change out is the same for both gases. 2. You must remove all grates and burner covers to expose the main burners in the grill. 3. On the bottom rear of each burner is a cotter pin. Remove cotter pin. 4. Slide burner to the rear of the grill and up. Repeat for each burner. 5. Where the burner was located going through a hole in the basin and connecting to the valve is now evacuated space. 6.
LP Gas Connection The LP hose regulator is not included with the grill and needs to be purchased separately. Appliance pressure 10” W.C. Inlet pressure 11” – 14” W.C. Purchase a standard 20 LB. LP tank with QCC – 1 fitting. Assemble pipe/hose assembly as shown. After completion of assembly, turn the tank valve on and turn the control valves on the grill to the ‘HI/IGN’ position for 10 – 15 seconds to purge the line of air. Inspect the hose before each use of the appliance.
Leak Testing All gas piping and connections must be tested for leaks after installation or service. All leaks must be corrected immediately. Remember-before exchanging an empty bottle for a new one make sure all control valves are in the “off” position. Open the valve (shut-off or ‘ON’ LP tank). Test for leaks by applying liquid soap solution to all joints. Bubbles forming indicate gas leak.
Lighting Instructions Before Lighting Visually inspect the gas line, hose and all connections for signs of wear, abrasion or cuts. If evidence of deterioration is visible, replace the part prior to use. If you smell gas, check for leaks. If odor continues, turn off fuel supply and immediately call for service. Keep your face and body away from the grill top when lighting. Main/Grill Burner Lighting 1. 2. 3. 4. 5. Open lid and make sure all burners are in the ‘OFF’ position.
Operation !! WARNING !! - DO NOT LEAVE YOUR GRILL UNATTENDED WHILE IN OPERATION! Grill: Grill burners are controlled individually with control knobs. After lighting, turn the knob to HI, LO or in between as desired. Turn on as many burners as required. The top cover may be closed during grilling. Keep the top cover in closed position during the pre-heat period.
Cleaning & Maintenance Keep outdoor cooking gas appliance area clear and free from combustible materials, gasoline and other flammable vapors and liquids. Do not obstruct the flow of combustion and air ventilation. Keep the ventilation opening(s) of the cylinder enclosure free and clear from debris. Visually check burner flames for proper operation. There are many different stainless steel cleaners available. Always use the mildest cleaning procedure first, scrubbing in the direction of the grain.
Parts Removal & Replacement Grill Burner: - Remove top grates. - Remove shields. - Remove cotter pin on the bottom rear of each burner and slide out. - Clean and replace in reverse order. Main Burner Electrode: Remove front panel. - Unscrew the electrode bracket from the valve. - Disconnect wire from the valve. - Replace in the reverse order. Rotisserie Electrode: - Remove electrode cover – lift and pull. - Remove electrode screws and pull out. - Disconnect wire at rear. - Replace in reverse order.
Parts Diagram SO301BQRRL, SO421BQRL # 01 01 02 03 04 04 05 06 06 07 08 08 09 10 11 11 12 12 13 14 15 15 16 16 17 17 18 18 19 20 21 22 23 24 25 26 27 28 28 29 30 30 31 32 33 34 34 35 36 37 38 39 39 40 41 42 42 43 44 45 46 47 48 49 49 50 50 51 52 53 16 Part SO-001 SO-002 SO-003 SO-004 SO-005 SO-006 SO-007 SO-008 SO-009 SO-010 SO-011L SO-011N SO-012 SO-013 SO-014 SO-015 SO-016 SO-017 SO-018 SO-019 SO-020 SO-021 SO-022 SO-023 SO-024 SO-025 SO-026 SO-027 SO-028 SO-029 SO-030 SO-031 SO-032 SO-033 SO-034 SO-035
Parts Diagram SO261BQTR, SO321BQRTRL, SO381BQRTRL # Part 35 SOTR-039 36 SO-046 37 SO-047 38 SO-048 39 SO-049 40 SOTR-040 SOTR-041 40 SOTR-042 41 SO-052 42 SO-053 43 SOTR-043 43 SOTR-044 44 SO-056 45 SO-057 46 SO-058 47 SO-059 48 SO-060 49 SO-061 50 SOTR-045 50 SOTR-046 Description 38" - LED w/Wire Side Burner LED Outlet Control Knob Knob Bezel Solé Logo Plate 26" - Control Panel 32" - Control Panel 38" - Control Panel Light Switch LED Switch 32" - Light Wire 38" - Light Wire Rotisserie Motor Bracket Rotis
Wiring Diagram 18
Do's & Don'ts DO… Have propane cylinder (LP units) filled by authorized LP supplier. Record your grill model number on your instructions and keep the instructions and parts list in a convenient place. Check all gas line connections for leaks with soapy solution prior to lighting, tighten until bubbles disappear. Raise the hood before lighting the burner. Preheat the grill 5 minutes maximum before cooking.
Solé Gourmet Luxury & TR Series Limited Warranty LIMITED WARRANTY Solé, warrants to the ORIGINAL PURCHASER of each Outdoor Gas Grill that when subject to normal residential use, it is free from defects in material and workmanship for set periods below. It does not apply to rust, corrosion, oxidation or discoloration, which may occur due to moisture or overheating.
8
www.solegourmet.