Safety Instructions

SRVO
8
Control Instructions
1. Resistance adjustment
 On the SRVO control panel, you can perform resistance adjustments, switch
modes, and start/stop operation.
 If the number on the display is flashing, SRVO is in adjustable state.
 You can adjust the resistance weight by turning the knob. Turn to the right to
increase, and turn to the left to decrease.
 After adjusting to the desired weight, press the start and stop button to engage
resistance.
 To ensure your safety, you will not be able to switch between modes or weights
after starting the power station. At this time, the number on the screen is always on
and will not flash; you need to press the start and stop button to release the
resistance to continue the weight adjustment.
2. Wireless control button（Model：SRVO SR260 SWITCH）
 The wireless switch is able to turn weight on/off. After pairing with the device, click
to control weight on/off.
 Press and hold wireless switch to pair. If blue light flashes 5 times, it means pairing
is successful. During pairing state, press and hold to cancel to exit pairing. If the
red light flashes 5 times, it means pairing is canceled.
 The wireless switch uses a coin battery for power supply. When battery is low,
remove plastic cover to replace battery
 Different flashing sequences indicates different states of the switch
Connecting
Red/blue light flashes alternately
Connected
Blue light flashes 5 times
Unpaired
Red light flashes 5 times
Button clicked/released
Blue light lit/off
Low Battery
Red light flashes for 10 seconds.
3. APP Connection
 SRVO can be connected to the SOLE+ APP. The SOLE+ app is able to remotely
control the SRVO, preset training plans, view movement instructions and many
other functions.
 Open SOLE+ APP, click on Bluetooth icon in the upper right corner, select SRVO,
and search for the device. In the searched device list, click on the corresponding
device to connect. Make sure SRVO is power on.