User's Manual

18
7. On the Radio management GUI, navigate to Management -> Upgrade to
access the Upgrade screen (see sample below).
8. Enter the FTP Server IP Address, Username and Password information as
requested.
9. Enter the three digit software version to be loaded onto the Radio. Format
will be x.y.0 (e.g – 1.4.0).
10. Press the ‘Upgrade’ button to begin the file transfer process.
11. Once complete, the unit must be rebooted for the upgrade to take effect.
Do not power down or unplug the unit during the upgrade
process.
If the upgrade fails to complete, or times out:
- Verify the FTP user account has read permission on the target folder.
- Verify that the FTP server’s software firewall is disabled. For example,
Windows XP has an integrated firewall that can block the upgrade.
- Retry Upgrade procedure.
19. System Reboot
Navigate to Reboot to access the System Reboot function:
Click on the Reboot button to reset/reboot. The reboot process will take
approximately 60 seconds. Once the rebooting is done, you can use the Click
Here button below to access the user interface again.