User's Manual

22
distance RW 16 set distance [miles]
show distance
Set distance in miles
encrypt RW open set encrypt [open | AES | radius] show encrypt Open: no authentication/encryption
AES: PSK authentication / AES encryption
Radius: 802.1x authentication / AES
encryption
ethcfg RW auto set ethcfg [auto-neg | 10baseT-HD | 10baseT-FD |
100baseTx-HD | 100baseTx-FD]
show ethcfg
Set ethernet speed and duplex
exit W
exit
Logout from Telnet session
freq RW Varies by region set freq [frequency] show freq Set RF frequency in MHz
ftppass RW p set ftppass [password] show ftppass Set remote ftp server password
ftpuser RW ftp set ftpuser [user] show ftpuser Set remote ftp server username
get R
get
Get commands
gwaddr RW 192.168.1.1 set gwaddr [a.b.c.d] show gwaddr Set default gateway IP address
help R
help
Show commands
history R
history
Show command history
ipaddr RW 192.168.1.100 Slave
192.168.1.200 Master
set ipaddr [a.b.c.d] show ipaddr Set IP address
ipmask RW 255.255.255.0 set ipmask [a.b.c.d] show ipmask Set IP netmask
log R show log Show Event Log
logout W
logout
Logout from Telnet session
macaddrs R show macaddrs Show Ethernet and RF MAC addresses
mod RW QAM16 ½ show mod
set mod <bpsk-1/2 | qpsk-1/2 | qpsk-3/4 | qam16-1/2
| qam16-3/4 | qam64-2/3 | qam64-3/4>
Show Current Modulation
name RW (blank) set name [name] show name Set system name
ntpaddr RW 192.168.1.1 set ntpadd [a.b.c.d] show ntpaddr Set NTP server address
password W Factory default: admin
Customer default:
retains password
password [guest] Change admin password or guest password
patchlist R show patchlist Show system patches