User's Manual

C. L

OG INTO THE HTTP MANAGEMENT SYSTEM

• Open networking properties in your Windows OS. Find the TCP/IP

setup window of your wired Ethernet adapter. Set the IP addresses to

the following values.

Ethernet’s IP Address: 192.168.1.1

Subnet Mask: 255.255.255.0

• Open a Web Browser on the Test PC

• At the URL line, type in the following: http://192.168.1.100

to access

the login prompt for a Slave unit, or http://192.168.1.200

to access a

Master unit.

• The username is admin and the default password is admin. Click

OK and you will see the Main Status screen as shown below: