User Manual

C. LOG-IN TO YOUR SKYWAY
• Connect your computer and SKYWAY 5000 unit using an Ethernet cable.
Use a straight CAT 5 cable if a network hub/switch is used or use a
cross-over cable if a computer is directed connect to the SKYWAY 5000
unit.
• Start a Web Browser on your computer (such as Netscape Navigator or
Microsoft Explorer).
• At the URL line, type in the following: http://192.168.0.1 to access the
Status screen below.
This screen can be referred back later for a summary view of the status of your
SKYWAY 5000 unit. At the initial boot-up out of the box, only the factory default
values should be displayed.
• Click on the login menu option located in the navy-blue left menu bar.
The following screen should appear.
• Type in solectek for the username and solectek for the password. You
can change the password later once you are in the interface screens.
Click start and you will see the left menu bar changed to the following.
g