User Manual

4. Base Station Access Configuration
• In the above screen, click on the Base info menu option under the
Management parent menu in the left menu bar to access the
following screen:
You can add an authorized client by typing in the following information.
- Base MAC: This is the hardware MAC address of the base station that
the client unit is intended to connect. This can be found in the user
interface of the base station unit.
- Description: Type in any description that will easily identify the user of
the base station with the above MAC address (e.g. main-street-
branch).
CAUTION: Descriptions must be a single word only. No spaces are
allowed.
5. Monitoring Operation
The basic status of the unit can be seen in the Status screen as seen in the
following screen.
``
This screen displays current values for the field items displayed. Go to the
Configuration screen if you would like to change any of these properties.
Three noteworthy items:
• Operational For: This is the time that the unit has been running. It
will reset to zero if the unit is rebooted
• MAC Address: this is the MAC address of the unit. Clicking on the
hyperlink will lead you to the wireless Status screen below.
• Description/Base Station’s MAC/ State : If you have configured the
base station, its desription and MAC address will show up here. You can
click on the MAC address hyperlink to see its wireless Status, similar to
the screen below.