User's Manual

Fig 3-6 HyperTerminal configuration (4)
The serial port is now successfully configured and can be used for configuring
information (such as IP address) for connected base station so that the base station is
linked to the EMS server.
3.3 Add a BTS in EMS Server
If the client program is running in EMS Server computer, click [Resource Management]
to add new base station. Here only some necessary configurations are required, such as
base station name, ID, IP address, subnet mask and network gateway, etc, which should
be filled in according to your system network plan design.
Go to “Net Element” and select “Add Net Element” (Fig 3-7) and the “Add Net Element”
screen will be shown (Fig 3-8).