User's Manual

Press any key on the keyboard to stop automatic startup and input configuration
information to configure base station:
Now there will be a boot message in HyperTerminal screen: [VxWorks Boot]:
This message provides some operations of simple commands. Input “?” or “h” and press
[Enter] to display a set of commands (and examples). To use any command, just input
character
command with optional parameters and press [Enter].
Boot Commands
[VxWorks Boot]: ?
? - print this list
@ - boot (load and go)
p - print L3 boot params
P - print L2 boot params
c - change L3 boot params
C - change L2 boot params
l - load boot file
g adrs - go to adrs
d adrs[,n] - display memory
m adrs - modify memory
f adrs, nbytes, value - fill memory
t adrs, adrs, nbytes - copy memory
e - print fatal exception
v - print boot logo with version
n netif - print network interface device address
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
boot device: ata=ctrl,drive file name: /ata0/vxWorks
Boot flags:
0x02 - load local system symbols
0x04 - don't autoboot
0x08 - quick autoboot (no countdown)
0x20 - disable login security
0x40 - use bootp to get boot parameters
0x80 - use tftp to get boot image
0x100 - use proxy arp
available boot devices:Enhanced Network Devices
mv0 ata
Explanations of all commands:
 @ -Used when all parameters are set as required. This command will continue to
execute previously cancelled boot initialization process.
 p - This command will display a brief description of L3 parameters in current boot
configuration.
 P - This command will display a brief description of L2 parameters in current boot
configuration.
 c - This command can be used to change current L3 boot parameters. Once this
command is selected, a detailed option list will be displayed. Modify and overwrite it.
When all options are modified, the system will return to [VxWorks Boot]: message.
During these processes, press [Enter] to accept current parameters value or input
new parameters value and press [Enter] to confirm. Besides, input “.” and press
[Enter] to clear current value of this entry and restore it to default. If any error occurs,
process “-(hyphen)” and [Enter] to return to previous option. Or you can continue this
erroneous entry and modify it when returning to [VxWorks Boot]: command line.