User Manual

10
 Select “Start times“ and conrm by pressing OK.
 Select your program A, B or C in The box in the top
left-hand corner of the screen using the ABC key.
 Set the hours and minutes for each start time (up to
8 start times per program) using the ON OFF keys,
and conrm by pressing OK.
When you exit this screen, the watering starts will
automatically be sorted in chronological order.
• Watering run time
Each station can be assigned to the 3 programs A, B
and C, with dierent times for each program (TBOS-II™
controllers only).
Then select “Programs“ from the Infrared welcome
menu and conrm by pressing OK.
 Select “Valve run time“ and conrm by pressing OK.
 Select the program A/B or C to be assigned to each
valve (1 to 6) using the ON OFF keys, then go to
hours and minutes by pressing arrows. Enable the
input with OK. Conrm by pressing OK.
• Start times
Transmitting the time, date and program.
Press the centre key of the eld transmitter to return
to the Infrared welcome screen.
 Select “Transmit“ and conrm by pressing.
If you wish to synchronise the time and the
date of the TBOS controller with that of the
eld transmitter, simply read the contents of
the TBOS module and make a transmission
without altering the program.
Water budget programming
You have the option of changing the watering time for
each one of the 3 programs A, B and C and for each station.
• Seasonal adjustment per program
 Press the centre key of the eld transmitter to return
to the Infrared welcome screen.
 Select “Water budget“ and conrm by pressing OK.