User Manual

12
- Program run times (programs A, B and C)
- Station run times (1 to 6)
Transmitting a watering program to the control
module
Once programs A, B and C have been set, they can be
sent via infrared to the connected TBOS control module.
 Select “Transmit“ from the Welcome menu and
conrm by pressing OK.
 The program to be downloaded will be displayed on
the screen. Conrm the transmission by pressing OK.
2 . Manual actions
 Select “Manual watering“ in the TBOS IR welcome
screen and conrm by pressing OK.

Then, select the type of manual action to be performed:
- Stop watering
- Start a station
- Start a program A, B or C
- Perform a test on all stations.

Select the “Stop watering“ menu and conrm by
pressing OK to manually stop the watering operating
in progress.
Manual actions override other actions. Any program that is running will therefore be deactivated
to take account of the manual function.
Stop watering