User Manual

14
The data will then be immediately transmitted to the TBOS
TM
and is
totally independent of the programming.
 If you select the “OFF“ option, watering will be automati-
cally stopped until switched back on. To restart, perform
the same steps as above and select the “ON“ option.
Saving the general program in the TBOS-II™ eld transmitter
The new TBOS-II™ universal eld transmitter contains an internal memory that can store up to 3 dierent programs
(irrigation + names).
You can, for example, create 3 dierent programs covering specic seasons (Spring/ Summer/ Autumn) and save them
in the eld transmitter. This action allows you to save time, as they can be transmitted by a simple click at the time of
your choosing. The program of the control module must be read beforehand.
 Select “Program memories“ from the TBOS™ IR welcome
screen and conrm by pressing OK.

Then, choose between two options: “Save“ the data in the eld
transmitter or “Restore“ the data.
The “Restore“ function allows you to delete all data
contained in the eld transmitter except for the time
and the date. “Restoration“ replaces the program
displayed on the eld transmitter. A transmission
must then be made to the control module.
Saving program data on the TBOS-II
TM
control module
The TBOS-II™ has memory for storing another program in addition
to its current program.
 Select “Backup TBOS“ from the TBOS™ IR welcome menu and
conrm by pressing OK. The console can send a save instruction
to the TBOS™, which will then make a copy of its current
program in its backup memory.

Then choose “Save“ if you wish to save your program in the internal
memory of the control module. Conrm by pressing OK.
 Choose “Manual recall“. Upon receiving this instruction, the TBOS™
immediately replaces its current program with the backup program.