User Manual

15
 Choose “Automatic recall“ if you wish to program the ove-
rwriting programs already saved in the control module and
replace them with new ones (between 1 and 90 days).
Select your time period using the ON OFF keys and conrm by
pressing OK.
After the specied time period, the new program will be
automatically transmitted by the TBOS™ to the control module.
The dierent control modules and watering stations can be individually named for ease of identication, and thus
simpler programming system operation.
 The control module will thus contain the “saved“ program
and the “active“ program. Both are stored in the memory
in case of a power failure.
Changing the names of the TBOS-II™ control modules and stations
 Select “Names“ from the TBOS™ IR welcome menu and conrm
by pressing OK.

To name your control module, select “TBOS“ then enter the
characters using the ON OFF and arrows keys.
 To name your various stations, select the station from the list and
enter the characters in the same way. (Ex: NORTH RAB for the
North round-a-bout.) Then conrm by pressing OK and move to
the next character.