User Manual

18
4. Automatic radio search of existing TBOS™ control modules
This is an essential step for communicating by radio with all radio interface units mounted on a TBOS™ or TBOS-II™
control module. This search will automatically detect all nearby TBOS™ control modules; up to a limit of 32 products
(the rst 32 control modules detected will be listed).
 Press any key to switch on the eld transmitter and display the
welcome menu.

Press OK, select “TBOS Radio“ using the OFF key and conrm by
pressing OK
 Then, in the TBOS Radio II menu, select “TBOS nding“.
 The “Finding… “ screen will be displayed for a minimum of 25 to 60
seconds according to the number of TBOS
TM
modules detected.
 Once TBOS™ module detection is completed the “TBOS list“ screen
is displayed, with the characteristics of each module:
- TBOS module name (max. 12 characters).
- The battery charge level icon of the TBOS-II™ module.
- (0 to 3 bars) or the TBOS™ module (low battery.
- or no icon if the battery charge level is OK).
- Radio interface unit battery charge level icon (0 to 3 bars).
- Level of radio signal reception between the TBOS-II™ eld
transmitter and the radio interface unit.
 This TBOS™ control module Radio search list is saved and
can subsequently be accessed via the“TBOS list“ menu in
the “TBOS Radio“ screen.
5. Receiving a program via radio
 Select “TBOS list“ from the TBOS
™ Radio welcome menu and
conrm by pressing OK.

Once the list of TBOS™ modules is displayed on the screen, select
the chosen module using the OFF key and conrm by pressing OK.
 A radio reception “Receiving...“ message is displayed, followed
by a summary of the TBOS™ module program.