Specification Sheet

54
GC_DB_0111 January 2011
MODEL OVERVIEW
Model DB belt drive fans are designed to exhaust air up to 28,000 CFM in high static pressure
applications to 1-1/4”. The aluminum exterior provides an attractive appearance. Belt drive results
in lower operating RPM and sound levels, making the Model DB well suited to applications where
quiet operation is important. Belt drive also permits easy performance adjustments when needed to
balance the total ventilation system. The non-overloading backward inclined wheel with its higher
static pressure capability makes this unit suitable for either ducted or nonducted applications. It’s roof
mounting permits location near the area to be ventilated, allowing short duct runs and more efcient
operation.
DBs are primarily used for the exhaust of relatively clean air
from a wide range of commercial, industrial and institutional
environments such as manufacturing and assembly plants, ofce
buildings, schools, hospitals, restaurants, athletic facilities and
many others
Industry best 5 year fan housing warranty, 1 year motor warranty
MODEL DB
BELT DRIVE CENTRIFUGAL ROOF EXHAUSTER
MODEL FEATURES
• Exhaust air up to 28,000 CFM in high static pressure applications up to 1-1/4” w.g.
• Attractive spun aluminum exterior
• Belt drives permit easy performance adjustments when needed
• Non-overloading backward inclined wheel for efciency at higher static pressures
• AMCA Air and Sound Licensed
• cULus 705 Listed
Model DB is available
in our Quickship program.
Sizes 6-36 are available for next
day, 3-day or 10-day shipping
from stock.
All specications are subject to change without notice unless approved in submittal by Soler & Palau.
MODEL NAME TYPICAL APPLICATIONS
DB Removal of clean air in general applications
DB-HWL High Wind Load and Hurricane Zone version of DB
APPLICATION CONSTRUCTION OPTIONS