Specification Sheet

130
1 year fan housing warranty, 1 year motor warranty
Motor mounting plate with
integral belt tensioning device.
Heavy-gauge galvanized
steel housing (aluminum
optionsal).
Deep spun
venturi inlet.
Aluminum non-overloading
backward inclined wheel.
Open drip-proof motor
(many options available).
Adjustable motor
sheave.
Removable access panels
(2) with neoprene gaskets.
Removable drive and
bearing covers.
Corrosion resistant
fasteners.
Cast iron pillow block air
handling bearings.
Integral inlet and outlet
duct anges.
AMCA Seal
Assures rating of Sound
and Air performance
UL Label
For electrical reliability
Factory Run & Tested
Assures dependable
operation
MODEL OVERVIEW
Model SQB fans are available in sizes 7 through 42, moving from 100 to over 24,000 CFM, with high
static pressure capabilities to 3-1/2”. SQB units are the perfect selection for clean air applications
where space is a leading consideration. The compact housing, with removable access doors (2), can
be mounted in any orientation.
MODEL SQB
BELT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN
MODEL FEATURES
• Exhaust air up to 24,000 CFM in high static pressure applications up to 3-1/2” w.g.
• Belt drives permit easy performance adjustments when needed
• Ideal for applications where space is limited
• Non-overloading backward inclined wheel for efciency at higher
static pressures
• AMCA Air and Sound Licensed
• cULus 705 Listed
Model SQB is available
in our Quickship program.
Sizes 7-24 are available for next
day or 3-day shipping from stock.
CONSTRUCTION FEATURES AND OPTIONS
MODEL NAME TYPICAL APPLICATIONS
SQB Removal of clean air in general applications
SQBHP High Pressure version of SQB
APPLICATION CONSTRUCTION OPTIONS
All specications are subject to change without notice unless approved in submittal by Soler & Palau USA.
GC_SQB_0111 January 2011