Specification Sheet

ManualsBrandsSoler and Palau ManualsView AllSoler and Palau 1/2 Horse Power 17.7 Sones 208-230/1/60 Volts Square Inline Direct Drive Centrifugal Duct Fan

151

MODEL OVERVIEW

Model SQD fans are available in sizes 6 through 15, moving up to 2,800 CFM, with static pressure

capabilities to 1". SQD units are the perfect selection for clean air applications where space is a leading

consideration. The compact housing with removable access doors can be mounted in any orientation.

1 year fan housing warranty, 1 year motor warranty

Heavy-gauge galvanized

steel housing (aluminum

optional).

Heavy-gauge galvanized

motor mounting bracket.

Optional mounted and

wired disconnect switch.

Removable access panels

(2) with neoprene gaskets.

Aluminum non-overloading

backward inclined wheel

(SQD 60 has composite wheel).

Speed controllable totally

enclosed motor (standard).

Corrosion resistant

fasteners.

Integral inlet and outlet

duct anges.

AMCA Seal

Assures rating of Sound

and Air performance

UL Label

For electrical reliability

Factory Run & Tested

Assures dependable

operation

MODEL SQD

DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN

MODEL FEATURES

• Exhaust air up to 2,800 CFM in high static pressure applications up to 1” w.g.

• Direct drive units have low sound levels and quiet operation

• Ideal for applications where space is limited

• Non-overloading backward inclined wheel for efciency at higher

static pressures

• AMCA Air and Sound Licensed

• cULus 705 Listed

Model SQD is available

in our Quickship program.

Sizes 6-15 are available for next

day, 3-day or 10-day shipping

from stock.

CONSTRUCTION FEATURES AND OPTIONS

All specications are subject to change without notice unless approved in submittal by Soler & Palau USA.

GC_SQD_0111 January 2011

Summary of content (8 pages)

PAGE 1
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN Model Features • Exhaust air up to 2,800 CFM in high static pressure applications up to 1” w.g.
PAGE 2
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN Construction/Specification Checklist Blower/Housing • Aluminum, non-overloading, backward inclined centrifugal wheel statically and dynamically balanced. SQD 60 has composite wheel. • Deep spun venturi inlet. • Heavy-gauge galvanized steel housing. • Integral inlet and outlet duct collars. • Universal mounting - horizontal, vertical, or any angle. • Easy access to interior of unit with removable side panels with closed cell neoprene gasketing.
PAGE 3
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN OPTIONS/ACCESSORIES Mounted and Wired Disconnect Hanging Bracket/ Mounting Foot with Hanging Spring Isolator Inlet/Outlet Guard Hanging Spring Isolators Backdraft Damper Assorted Disconnects Hanging Rubber in Shear Isolators Insulated Housing Speed Controls 153
PAGE 4
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN PERFORMANCE/DIMENSIONS Unit Specifications • 18 Ga. galvanized housing. • Approximate unit weight 30 lbs. • Aluminum backward inclined wheel. (SQD 60 has composite wheel) • Removable access panels. • Integral inlet & outlet duct collars. • AMCA Licensed Air & Sound. • Disconnect switch. • One (1) year warranty. • Universal/any angle mounting. SQD 60 Motor HP 100 WATT 2700 RPM .95 Max Amps @ 115/60/1 0 151 1.9 199 3.4 238 4.6 294 6.6 334 8.
PAGE 5
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN Unit Specifications • 18 Ga. galvanized housing. • Approximate unit weight 60 lbs. • Aluminum backward inclined wheel. • Removable access panels. • Integral inlet & outlet duct collars. • AMCA Licensed Air & Sound. • Disconnect switch. • One (1) year warranty. • Universal/any angle mounting. SQD 8125 Motor HP 1/25 HP 1050 RPM CFM / BHP / Sones @ Static Pressure 0 1/8 1/4 329 149 .01/1.6 .01/1.0 376 235 .01/2.5 .02/1.8 423 304 .02/3.3 .02/2.
PAGE 6
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN Unit Specifications • 18 Ga. galvanized housing. • Approximate unit weight 75 lbs. • Aluminum backward inclined wheel. • Removable access panels. • Integral inlet & outlet duct collars. • AMCA Licensed Air & Sound. • Disconnect switch. • One (1) year warranty. • Universal/any angle mounting. SQD 1025 CFM / BHP / Sones @ Static Pressure RPM 0 1/8 1/4 3/8 1/2 562 305 600 .02/2.3 .02/1.5 655 451 700 .04/3.3 .04/2.7 749 575 800 .05/4.5 .05/3.
PAGE 7
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN Unit Specifications • 18 Ga. galvanized housing. • Approximate unit weight 90 lbs. • Aluminum backward inclined wheel. • Removable access panels. • Integral inlet & outlet duct collars. • AMCA Licensed Air & Sound. • Disconnect switch. • One (1) year warranty. • Universal/any angle mounting. SQD 1225 CFM / BHP / Sones @ Static Pressure 0 1/8 1/4 3/8 1/2 920 599 .04/3.7 .04/3.0 1132 878 595 .07/5.7 .07/5.0 .07/4.4 1273 1051 809 529 .10/7.2 .10/6.5 .
PAGE 8
MODEL SQD DIRECT DRIVE SQUARE INLINE CENTRIFUGAL DUCT FAN Unit Specifications • 18 Ga. galvanized housing. • Approximate unit weight 120 lbs. • Aluminum backward inclined wheel. • Removable access panels. • Integral inlet & outlet duct collars. • AMCA Licensed Air & Sound. • Disconnect switch. • One (1) year warranty. • Universal/any angle mounting. SQD 1550 Motor HP 0 1348 .05/3.8 1618 .09/5.5 1887 .14/7.2 2157 1/2 HP 1075 RPM .22/9.2 2426 .31/11.5 2696 .42/14.0 2879 .51/15.