Specification Sheet

382
MODEL TUB
TUBEAXIAL UPBLAST PROPELLER ROOF EXHAUSTER
2 year fan housing warranty, 1 year motor warranty
MODEL OVERVIEW
Model TUB is designed for high capacity industrial and commercial roof exhaust applications. The
remote drive conguration of the TUB is especially suited for the removal of fumes, vapors, steam,
dust, smoke and contaminated or heated air. Belt drive models are available for continuous operation
in air temperatures to 200˚F. For temperature ratings to 1000˚F and/or IRI requirements refer to Model
TUB-HT
Capacities range from 6,210 to 60,116 CFM and up to 1” static pressure. Fan selections are available
in 24, 30, 36, 42, 48, 54 and 60 inch sizes. Horsepowers range from 3/4 to 15HP. Blade selections
are available in aluminum, steel, or berglass reinforced polypropylene (see capacity charts for
performances). Units are tested in accordance with AMCA 301 (sound) and AMCA 210 (air) in an AMCA
certied laboratory. Every unit is completely assembled and factory tested for quality assurance prior
to shipment.
MODEL FEATURES
• Exhaust air up to 60,116 CFM in static pressure applications up to 1” w.g.
• Straight-through air ow design results in maximum exhaust efciency
• Motor and drives are located outside of the exhaust airstream
• Belt drives permit easy performance adjustments when needed
• cULus 705 Listed
All specications are subject to change without notice unless approved in submittal by S&P USA.
GC_TUB_0111 January 2011