Specification Sheet

16
MODEL TD-MIXVENT
INLINE MIXED FLOW DUCT FAN
Performance characteristics
Models 100 up to 315 include a direct two speed motor connection.
Dimensions (inches/mm)
Model X A B C D E F G H
TD-100
5
15/16
151
9
1/8
232
5
7/16
138
3
3/4
96
3
7/8
98
3
1/4
82
3
3/4
95
1
7/8
48
2
1/16
52
TD-100x
7
3/8
188
11
15/16
303
6
15/16
176
4
1/2
115
3
13/16
97
3
15/16
100
3
9/16
90
3
1/8
80
2
3/8
60
TD-125
7
3/8
188
10
3/16
258
6
15/16
176
4
1/2
115
4
13/16
123
3
15/16
100
3
9/16
90
3
1/8
80
2
3/8
60
TD-150
8
3/8
212
11
5/8
295
7
7/8
200
5
127
5
13/16
147
4
7/16
112
5
1/8
130
3
1/8
80
2
3/8
60
TD-200
9
3/16
233
11
7/8
302
8
9/16
217
5
9/16
141
7
13/16
198
4
7/8
124
5
1/2
140
3
15/16
100
3
11/16
94
TD-250
11
7/16
291
15
3/16
386
10
11/16
272
7
9/16
192
9
3/4
248
6
1/8
155
6
5/8
168
5
11/16
145
5
1/2
140
TD-315
14
356
17
11/16
450
13
1/4
336
8
13/16
224
12
5/16
312
7
3/8
188
8
1/4
210
7
3/16
182
7
178
LS= Low Speed
HS = High Speed
Soler & Palau, Div. of Soler &
Palau Ventilation Group, certies
that the TD range up to size 315
shown herein is licensed to bear
the AMCA Seal. The ratings shown
are based on tests and procedures
performed in accordance with AMCA
Publication 211 and comply with the
requirements of the AMCA Certied
Ratings Program.
TD 250 & 315
are UL listed for
outdoor use.
The TD-MIXVENT Models
100, 100x and 150 are
California Title 24 compliant
and meet ASHRAE 62.2
when installed with a CVC
and other TD models are
compliant when installed
with a 3 way switch and
remotely mounted speed
control.
Sound characteristics
Fan sound levels are measured in sones. At this time there are no sone level test standards available through HVI due to the fact that remote mounted fan noise levels are
in proportion to the following: type of duct, length of duct, fan distance from the intake source and other miscellaneous factors. However, it is generally accepted that remote
mounted venting is usually quieter than standard (in room) venting.
Performance certied is for installation Type D: Ducted Inlet, Ducted Outlet. Performance ratings do not include the effects of appurtenances.
PERFORMANCE/DIMENSIONS
Model
Nom.
RPM
Volts
Max.
Watts
Speed
CFM v Static Pressure (SP) Ins. WG
Max.
SP
Max
operating
temp.
(ºF)
Wgt.
(lbs)
Duct
Dia.
Ins.
0” 0.125” 0.25” 0.375” 0.5” 0.75” 1.0”
TD-100
2431 120 23 LS 97 81 51 - - - - .4 104 2 4”
2516 120 26 HS 101 85 57 - - - - .4 104 2 4”
TD-100x
1556 120 20 LS 100 77 48 - - - - .375 104 4.4 4”
2096 120 33 HS 135 113 90 53 - - - .55 104 4.4 4”
TD-125
1633 120 24 LS 149 110 73 - - - - .35 104 4.4 5”
2146 120 38 HS 197 168 133 86 22 - - .55 104 4.4 5”
TD-150
1709 120 54 LS 218 193 163 128 105 24 - .8 140
4.4 6”
2289 120 65 HS 293 273 250 227 206 131 35 1.15 140 4.4 6”
TD-200
2322 120 139 LS 476 422 373 317 260 40 - 1.38 140 8.8 8”
2781 120 184 HS 538 495 458 418 367 190 10 1.625 140 8.8 8”
TD-250
2400 115 162 LS 541 475 418 355 295 218 170 2.03 140 19.8 10”
3200 115 241 HS 754 715 680 640 606 520 405 2.53 140 19.8 10”
TD-315
2000 115 208 LS 751 670 545 420 285 190 130 1.62 140 30.9 12.4”
2500 115 335 HS 1050 990 932 850 770 600 420 2.95 140 30.9 12.4”
TD-355 1400 115 464 - 1829 1740 1620 1530 1450 1190 - 1.1 140 43 14”
TD-400 1400 115 756 - 2630 2490 2360
2240 2100 1750 350 1.2 140 78 16”
Models 355 & 400
Models 100 - 315
Model A B C D E F G H I J K
TD-355
14
5/6
377
9
3/8
238
17
11/16
451
8
5/6
224
16
7/9
426
13
15/16
354
5
8/9
150
14
1/2
368
18
2/3
474
13
3/8
340
1/3
8.5
TD-400
16
407
9
4/5
249
19
3/8
492
10
1/2
267
19
1/6
487
15
5/7
399
6
2/7
160
16
3/4
425
21
5/9
547
14
4/7
370
1/3
8.5