Soler and Palau Install

IMPORTANT: When a guard is tted to the exhaust side of the fan, ensure that there is a gap of at least 4” between

the face of the guard and any moving part.

MOUNTING: Prepare a circular hole in the wall through which the space is to be vented. The size of the hole and the

xing positions are given in Figure (1). Fixing dimensions. Screws and bolts of a least 1/4” diameter should be used.

If the exhaust guard is used, it should be xed into position before the fan is mounted.

INSTALLATION OF COMPACT DUCT AXIAL FANS.

See Figure (2), in accordance with the information below.

COMPACT Duct Axial fans are intended to be installed within a ducted or partially ducted ventilation system. By

using COMPACT Duct Fan mounting feet (available at your local distributor) the fans can be mounted on any suitable

structure, for example: oors, walls, or ceilings and in any orientation.

For mounting the fans without intake or exhaust side ducting all models should be tted with the S&P intake or

exhaust side protection guards.

All accessories are available from your local distributor – please inquire.

ELECTRICAL CONNECTION.

All COMPACT Wall and Duct Axial Fans operate from a standard 120V 60Hz A.C electrical supply. All wiring must be

carried out in accordance with National Electrical Code, and all applicable state and local buildings codes.

Electrical connections should be made in accordance with the electrical wiring diagrams shown in Figure (3) Electrical

Wiring.

MAINTENANCE

IMPORTANT: BEFORE CARRYING OUT ANY MAINTENANCE OR SERVICING, ENSURE THE UNIT IS

DISCONNECTED FROM THE MAIN ELECTRICAL SUPPLY.

All COMPACT Wall and Duct Axial Fans incorporate sealed for life bearings and therefore do not require any

lubrication. We would recommend inspection of the product at least once every twelve (12) months to avoid the

excessive accumulation of dust and dirt on the impeller. To inspect the unit disconnect from electrical supply and

remove from ducting. If any debris is evident on the impeller, clean with a damp (not wet) cloth. DO NOT USE any

detergents or abrasive materials for cleaning.

FIVE (5) WARRANTY

Soler & Palau warrants that the COMPACT WALL AND DUCT AXIAL FAN series exhaust fans will be free from

defective materials and workmanship for the period of ve (5) years from the date of original purchase. In the event

that we nd any part is defective, the product will be repaired or, in the Company’s discretion, replaced without charge

provided that the product has been installed in accordance with the enclosed instructions and all applicable EPA

Standards and state and local building codes.

IF CLAIMING UNDER WARRANTY:

Please return the complete product, freight paid, to your local authorized distributor. All returns must be accompanied

by a valid Bill Of Sale. All returns must be clearly marked “Warranty Claim,” with an accompanying description stating

the nature of the fault.

THE FOLLOWING WARRANTIES DO NOT APPLY

• Damages from shipping, either concealed or visible. Claim must be led with the carrier.

• Damages resulting from improper wiring or installation.

• Damages caused by acts of nature, or resulting from improper consumer procedures such as: Improper

Maintenance; Misuse; Negligence; Alteration; Abuse; Abnormal Use; or Accident or Incorrect Electrical

Voltage and Current.

• Removal or alteration to the Soler & Palau data plate label.