Ultra Thin Micathermic Heater OWNER’S MANUAL Model # HM1-10-32 PLEASE SAVE THESE INSTRUCTIONS WARNING: READ THIS OWNER’S MANUAL CAREFULLY BEFORE USE.
ULTRA THIN MICATHERMIC HEATER Thank you for choosing a Soleus Air heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new heater. For your own records, please attach a copy of your sales receipt to this manual.
NOT use on soft surfaces, like a bed, where openings may become blocked. 12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open flames. 13. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No. 16 AWG minimum size and rated not less than 1500W. 14.
SPECIFICATIONS Voltage Rating 120 V (60Hz) Power Consumption 500/1000W Unit Size 18 in. (W) x 8 5/8 in. (D) x 26 in. (H) Unit Weight 8.
ASSEMBLY 1. Remove the heater body, two wheelbases, wheels, screws, and washers from the box. Remove the packaging materials and keep for future storage. 2. Attach the wheels to each wheelbase with the supplied wheel screws, small black springwashers, and small grey washers. Wheel Screw Wheel Small Black Spring-Washer Small Grey Washer Wheel Base 3. Be certain the heater is unplugged and the controls are set to off. Set the heater on the floor upside down. 4.
OPERATING INSTRUCTIONS Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Only operate heater in upright position with caster wheels attached. Two controls dials; one to select the power setting, and the other to select the desired temperature. Power Indicator Light Power Select Dial Set Temperature Dial 1. Select a heat setting. For LOW heat (500W), turn the POWER SELECT dial until it is aligned with LOW.
3. Leave the thermostat control at its maximum setting until the desired temperature is reached. Carefully lower the thermostat control by turning counter-clockwise until the heater stops operating. The indicator light will shut off. 4. Leave thermostat control at this position. The heater will automatically cycle on and off to maintain the chosen room temperature. The indicator lights will also turn and off to indicate when the heater is operating. 5. Unplug the heater when not in use.
MAINTENANCE 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 4. DO NOT immerse the heater in water. 5.
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air HM1-10-32 to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc.