HM5-15-30 Wall Mountable Micathermic Heater Operating Instructions 4003575 V150727
Thank you for choosing a Soleus Air Micathermic heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Micathermic heater. For your own records, please attach a copy of your sales receipt to this manual.
12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammable liquids are used or stored. Keep unit away from heated surfaces and open flames. 13. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or relocatable power tap (outlet/power strip). 14. To avoid fire or shock hazard, plug the unit directly into a 120 V AC electrical outlet. 15.
SAFETY FEATURES Tip-Over Safety Feature This heater is equipped with a tip-over safety feature. Once the heater is tipped over, an internal switch will automatically shut the heater off. Once the heater is restored to an upright position, the heater will reset. To continue operation, turn on the heater using the supplied remote control or the control panel on the heater. Overheat Safety Feature This heater is equipped with a overheat safety feature.
PRODUCT DIAGRAM CONTROL KNOBS CASTER LEG 5
ASSEMBLY - INSTALLATION Legs Assembly Instructions 1. Align leg assembly with the bottom of the heater using screw holes. 2. Secure the leg assembly to the heater using two of the provided short screws. 3. Repeat these steps to complete the installation of second leg. Short Screw x 4 Wall Mount Instructions 12.5" Find a suitable location to mount the heater. Be sure there is enough space for control knob operation and heat distribution once the mount is complete.
OPERATING INSTRUCTIONS 1. Place the heater on a firm, level surface and plug into a grounded 120V/60Hz power outlet. The power indicator will light up once the power cord is plugged in. Only operate the heater in upright position with caster wheels attached. 2. Turn the Power Knob clockwise to “Low” for low heat, turn the Power knob clockwise one more time to “High” for high heat. Turn the Power knob counterclockwise to “Off” to turn off the unit. 3.
OPERATING INSTRUCTIONS (CONTINUED) OPTIMAL OPERATING CONDITIONS 1. For optimal performance, place the heater in a room and close all windows and doors. This will confine the heat to the area that needs it most. 2. To save energy and in turn save money in the winter, place the heater in a room or area that needs extra heat instead of raising the thermostat on your central heating system.
MAINTENANCE 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 4. DO NOT immerse the heater in water. 5.
WARRANTY One Year Limited Warranty Soleus Home Comfort warrants the accompanying Soleus Air heater to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus Home Comfort will, at its option, either repair or replace it, free of charge within a reasonable time after the unit is returned during the warranty period.
