User Guide

NOTE: Do not use the exhaust duct when the unit is running at dehumidifying model. You mustremove
theexhaust duct fromthe unit. When the unit isrunning at dehumidifying mode, the Panspeed cannot be
adjusted.
Keep the windows and the doors closed to aid the effectiveness of the unit in removing the moisture
fromthe room.
3) Fan Operation
a) Plug the Power Cord to the power outlet.
b) Turn on the unit bypressing the On!OffButton on the control panel.
c) Press the Mode Button until DFANDappears on the LCD display.
d) Select the Pan speed by pressing the Fan Speed Button.
NOTE: When the unit is running on Pan mode, the exhaust duct is inoperative and is not required.
OPERATION USING REMOTE CONTROLLER
The remote controller provided with the unit may operate this portable air conditioner. The remote
controller uses two - AAA batteries (provided). Install the batteries before using the remote controller.
NOTE: The information displayed on the LCD ofthe remote controller will only be transmitted to the
air conditioner when the On!Off, Transmit, Sleep or Auto buttons (transmitting buttons) are pressed.
Any changes made to theLCD display will bereversed to the previous setting if none of thetransmitting
buttons is pressed within 15 seconds after the changes are made.
NOTE: When the remote controller is off, the LCD only displays the current time.
-8-