Manual and User Guide

10
OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air
Conditioner mode, Dehumidifier mode, Fan only mode, and Auto mode. Each press of the MODE but-
ton will light up a different icon on the control panel. The exhaust hose and window kit must be in-
stalled when the unit is in Air Conditioner, Dehumidifier mode, and Auto mode. When using the unit as
a fan, it is not necessary to keep the exhaust hose and window kit connected to the unit.
3) Temperature - Select the desired temperature by pressing either ▲ or ▼ key when using the unit in
Air Conditioner mode. The temperature indicator flashes to display the desired temperature setting. Af-
ter the temperature is set, the unit will display this temperature setting until it is changed by the user.
The temperature indicator display shows temperature in Fahrenheit. Under stand-by condition, press
and hold the Mode button for 20 seconds to switch between Celsius and Fahrenheit.
4) Bucket Full - When the unit cannot evaporate the collected moisture fast enough, the excess water
will collect in a backup water tank located inside the unit. The control panel will display “Ft” (Full
Tank) if this occurs.
5) Louver Direction - This unit has 4-way directional louvers. Use the louver guides manually to direct
air up and down. To direct air left and right, press the Auto-Swing Button for automatic comfort.
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL
Airflow
Auto-Swing
Button
Mode Selection
Button
Decrease
Temperature
Button
Increase
Temperature
Button
POWER
ON/OFF
Button
Fan Mode
Button
Air Conditioner
Mode
Indicator
Dehumidifier
Mode
Indicator
Sleep Mode
Indicator
Fan Speed
Indicator
Fan Mode
Indicator
Auto
Mode
Indicator
Timer
Indicator