Manual and User Guide

WINDOW KIT INSTALLATION

FOR SINGLE HOSE AIR CONDITIONER

The venting kit must be installed in order for the unit to work correctly in the air conditioner mode, dehumidifying mode,

and auto mode. The venting kit should not be used while the unit is fanning.

The window kit has been designed to fit into most vertical and horizontal window openings.

1. Screw the Exhaust Hose Con-

nector onto one end of the Ex-

haust Hose.

2. Connect the Exhaust

Hose over the discharge

opening on the back of the

unit.

3. Open the window or door to adjust the length of the Window

Kit to fit the opening. If necessary, mark the kit and cut one

end down to properly fit the opening.

Note: When using the venting system, keep the Exhaust Hose as straight as possible. The

Exhaust Hose can be shortened, but it is not recommended to increase the length of the Ex-

haust Hose. DO NOT use an extension cord with your Portable Air Conditioner.

Note: The Portable Air Conditioner above may differ from the unit described in this manual.

The above directions and images show general directions for Soleus Air single hose Portable

Air Conditioners.

*Optional Window Kit

Adapter Extension

Window Kit Adapter

*Window Kit Adapter Extension is an optional part can

be used on window sizes that require a longer connection

between the window and the exhaust hose.

4. Attach the Optional Window Kit Adapter Extension to

the Window Kit. Attach the Exhaust Hose to the Window

Kit Adapter. Attach the Optional Window Kit Adapter Ex-

tension to the Window Kit Adapter. Close the window

tightly. Your Portable Air Conditioner is good to go.