MS-10R Reflective Heater w/ Remote Operating Instructions 3033119 Model No.
Thank you for choosing a Soleus Air personal heater. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air personal heater. For your own records, please attach a copy of your sales receipt to this manual.
12. A heater has hot and arcing or sparking parts inside. DO NOT use in areas where gasoline, paint, explosive and/or flammble liquids are used or stored. Keep unit away from heated surfaces and open flames. 13. Avoid the use of an extension cord because the extension cord may overheat and cause a risk of fire. However, if you have to use an extension cord, the cord shall be No16.AWG minimum size and rated not less than 1500W. 14.
SAFETY FEATURES Tip-Over Safety Switch This heater is equipped with a tip-over safety switch located underneath the base of the heater. This switch must be pressed inward for the heater to function properly. Some soft surfaces such as carpet may not be able to fully press in this switch. For some soft surfaces, a hard flat object will need to be placed underneath the heater for it to function properly. PLEASE DO NOT TAPE OR GLUE THIS SWITCH.
ASSEMBLY Remove the heater body and base from the box. Remove the packaging materials and keep for future storage. Slide the neck of the heater head into the column connected by the cord, so that the holes in the neck align with the holes in the column. Insert and tighten the screws with a Philips screwdriver. Slide the cord through the opening in the back of the base. Insert the lip near the control panel into the opening in the front of the base. Push the body and base together.
OPERATING INSTRUCTIONS CONTROL PANEL OPERATION Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Press the POWER button to turn on the heater. Press the HEAT button to choose the desired heat setting. • LOW: heating up to 400W • HIGH: heating up to 800W TIMER: The heater is equipped with a 0.5 to 7.5 hour timer. To select the desired length of operation, press the TIMER button repeatedly. Add up the lit indicator lights for the total number of hours.
OPERATING INSTRUCTIONS REMOTE CONTROL OPERATION The remote control can be used to perform all the operations that can be performed from the control panel. REMOTE CONTROL HEIGHT ADJUSTMENT: Press in the height adjustment button and simultaneously pull the sliding column up to the desired height. Release the height adjustment button to set. To reduce the height, press in the height adjustment button and simultaneously push the sliding column down. Release the button to set.
MAINTENANCE 1. Unplug the unit and let it cool completely. 2. To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary. After cleaning, dry the unit with a soft cloth. CAUTION: DO NOT let liquid enter the heater. 3. DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause damage or deterioration to the surface of the heater. 4. DO NOT immerse the heater in water. 5.
WARRANTY One Year Limited Warranty Soleus International Inc. warrants the accompanying Soleus Air heater to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of ONE (1) year from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus International Inc.
