Use and Care Manual

.
PORTABLE AIR CONDITIONER
The window venting kit must be installed in order for the unit to work correctly. The window venting kit has been de-
signed to fit into most vertical and horizontal window openings and sliding glass doors up to 7 feet..
2. Twist the Exhaust Hose Connector
onto Exhaust Hose.
1. Open the window or door to adjust the length of the Window
Kit Panels to fit the opening. If necessary, mark the kit and cut
one end down to properly fit the opening.
3. Twist the Exhaust Hose Connector over the discharge opening
on the back of the unit and extend the Exhaust Hose. (Keep the
exhaust hose as short and straight as possible)
4. Attach the Exhaust Hose to the Window Kit Adapter. Now connect
the Optional Window Kit Adapter Extension to the Window Kit Adapt-
er. Then attach the Optional Window Kit Adapter Extension to the
Window Kit panel. Close the window or door tightly.
WINDOW KIT INSTALLATION
Keep the exhaust hose
as short and straight as
possible for maximum
efficiency.