Manualshelf

Use and Care Manual

ManualsBrandsSoleus Air ManualsAir Conditioners8000 BTU 206 CFM 3-Speed Portable Evaporative Air Conditioner for 250 sq. ft. with LCD Remote Control
12345678910
1
OPERATING THE UNIT
Air Conditioner Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER button.
4) Press the Mode button until the air conditioner mode indicator lights up on the control panel dis-
play.
5) Press the ▲ or ▼ until the desired room temperature appears on the control panel display. The tem-
perature ranges from 63˚F - 88˚F.
6) Select the desired fan speed by pressing the SPEED button on control panel.
NOTE: During hot days, the unit will cool the room most efficiently by setting the temperature at the low-
est setting and the fan speed on high. Reducing the length of the exhaust duct, insulating the ex-
haust hose and window kit, and keeping direct sunlight to a minimum will also improve the cool-
ing efficiency.
NOTE: When the unit is running on air conditioning mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
Dehumidifier Mode
1) Install the exhaust hose and window kit properly (see pages 7 & 8 ).
2) Plug the Power Cord into an electrical outlet.
3) Turn on the unit by pressing the POWER Button.
4) Press the MODE button until the dehumidifier mode indicator lights up on the control panel display.
NOTE: The unit operates at low fan speed during dehumidifier mode. The unit cools room slightly dur-
ing the dehumidification process. Keep the windows and doors closed to aid the effectiveness of
the unit in removing the moisture from the room.
NOTE: When the unit is running on dehumidifier mode, the exhaust hose is required and must be
vented outside using the supplied window kit.
Fan Mode
1) Plug the Power Cord into an electrical outlet.
2) Turn on the unit by pressing the POWER button on the control panel.
3) Press the MODE button until the fan mode indicator lights up on the control panel display.
4) Select the fan speed by pressing the SPEED button.
NOTE: It is not necessary for the exhaust hose and window kit to be installed to operate the unit in fan
mode.