Manualshelf

Use and Care Manual

ManualsBrandsSoleus Air ManualsAir Conditioners8000 BTU 206 CFM 3-Speed Portable Evaporative Air Conditioner for 250 sq. ft. with LCD Remote Control
9101112131415161718
1
REMOTE CONTROL OPERATING INSTRUCTIONS
3) Fan Speed
- Press the FAN speed button to cycle through high, medium, low fan speeds. When the
unit is in Air Conditioner mode, the fan speeds will cycle through in this order: High, Medium, Low,
When the unit is in Fan mode, the fan speeds will cycle through in this order: High, Medium, Low.
4) Temperature Setting
- When the unit is in Air Conditioner mode you can select your desired tem-
perature. Press the ▲ or ▼ to select your desired temperature setting. The temperature on the LCD dis-
play on the remote control will increase or decrease accordingly.
5) TIMER
Auto-On: To program the timer, when the unit is off, point the remote at the unit and press the TIMER
button. Once TIMER is pressed, the timer ON indicator will display on the remote control LCD dis-
play. Press the HOUR button to set the timer. The timer can be set in intervals of 1 hour up to 12 hours.
Auto-Off: While the unit is operating, point the remote at the unit and press the TIMER button. Once
the TIMER is pressed, the timer OFF indicator will display on the remote control LCD display. Press
the HOUR button to set the timer. The timer can be set in intervals of 1 hour up to 12 hours.
6) Hold Button
- Press this button to lock and unlock the remote control.
1. Remove cover on back of the remote control to expose CLK button.
2. Use a paper clip or pen to press CLK button; present time on LCD display will start to flash.
3. Press HOUR or MIN button to adjust time.
4. Press CLK button again to complete set up.
Time Adjustment
Reset Remote Control
Use a paper clip or pen to press the RST button once to
reset the remote control.
CLK
RST
Time
Set Button
Remote Control
Reset Button
CLK
RST
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air
Conditioner, Dehumidifier, Fan-Only mode. The selected mode will light up on remote con-
trol LCD display to indicate which mode the unit is currently operating in.
1) Power On and Off
- If the unit is already on, press the ON/OFF button on the remote while pointing
the remote away from the unit. This will turn the remote on. If the unit is off, now press the ON/OFF
button once to turn the unit on. Press the ON/OFF button once more to turn the unit off. When in Air
Conditioner mode, the selected temperature will appear on the remote control LCD display.