Use and Care Manual
A storm window frame will not allow the air conditioner to
tilt properly which in turn will keep it from draining properly.
To adjust for this, attach a board or piece of wood to the
sill. The board or wood piece should have a depth of at
least 1 1/2”. Make sure the board or piece of wood is ap-
proximately 1/2” higher than the storm window frame. This
will allow the air conditioner to tilt enough for proper drain-
age. (See FIG. ).
1.
Turn the ai
r conditioner off, and disconnect the power
cor
d
.
2.
Remove the
sa
sh seal fro
m
betwee
n
wi
ndo
ws, an
d
uns
cr
ew sa
sh
lock.
3.
Remove the
scre
ws in
stall
ed throu
gh th
e frame an
d
frame lo
ck.
4.
Clo
s
e (slide
)
the sid
e
pan
el
s into frame.
5.
Keeping a firm grip on ai
r con
ditione
r, raise the
sa
sh
and carefully
“ro
ck” ai
r co
n
ditioner b
ackward to drai
n
any c
o
ndensate water in bas
e
of unit. Be c
a
reful not to
spill any rem
a
ining
water
while lifting unit from window.
6.
Store part
s
wi
th the air con
d
itioner in the
box
SASH
1 1/2” MIN
(38 mm)
STORM
WINDOW
FRAME
Board or wood
piece must be
approximately
1/2” higher
than the storm
window frame
for proper
drainage
Note:
1. All supporting parts must be secured to firmed wood,
masonry, or metal
2. The air conditioner can be installed without the cur-
ns to fit in a narrow window opening.
3. The electric outlet must be within reach of the power
cord.
FIG. 4