Models WS2-06E-201 6,200 BTU WS2-08E-201 8,000 BTU WS2-10E-201 10,200 BTU WS2-12E-201 WS1-12E-01 12,000 BTU Electronic Window Air Conditioner Operating Instructions V180305
PURCHASE INFORMATION Thank you for choosing a Soleus Air Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new air conditioner. For your own records, please attach a copy of your sales receipt to this manual.
POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexible cord with no termination on the load side and a LCDI attachment plug on the line side.
PACKAGE CONTENTS Top Mounting Rail Air Conditioner 2 AAA Batteries Remote Control Owner's Manual Foam Seal Top Mounting Rail Insert Strip Weather Insulation Board Curtain Short Screw Curtain Lock Long Screw Sash Lock Part List: • • • • • • • Window Air Conditioner (1) Remote Control (1) AAA Batteries (2) Top Mounting Rail (1) Insert Strip (1) Short Screw (8) Curtain (2) • • • • • • Sash Lock (2) Foam Seal (1) Long Screw for Window Locking Bracket & Curtains (12) Curtain Lock (2) Owner’s Manua
SPECIFICATIONS • Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode. • Power consumption is measured when the fan runs at the highest speed setting. • These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit.
ELECTRICAL SAFETY WARNING: Avoid fire hazard or electronic shock, DO NOT use an extension cord or an adapter plug. DO NOT remove any prong from the power cord. DO NOT under any circumstances, cut, remove, or bypass the grounding prong!! Power supply cord with 3-prong grounding plug and current detection device DISCLAIMER ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE PRESENTATION OF THE MANUFACTURER. SOLEUS N.
INSTALLATION Window Preparation Please read all instructions prior to installing your air conditioner. Two people are recommended to install this product. If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing the unit. Before installing the unit, check the dimensions of your window to make sure the air conditioner will fit. This unit is made to fit inside a standard double-hung window.
TOP RAIL INSTALLATION NOTE: Top Rail and the side Panels are offset to provide the proper pitch to the rear of (5/16”). This is necessary for proper condensation utilization and drainage. If you are not using the side panels, the rear pitch must still be maintained. 1. Attach the top rail onto the top of the outer case using four Short Screws.
INSTALLATION Curtain & Weather Insulation Board Installa- Placing the Unit Inside a Normal Window tion 1. Set the unit in the window so that is centered. Place NOTE: The Weather Insulation Board adds an extra layer of insulation to keep air from passing through the sides of the window air conditioner. the unit so that front edge of the bottom rail is against the back edge of the sill. 2. Bring the window down so that the front edge of the top rail is in front of the window.
INSTALLATION IF AC is Blocked by a Storm Window Removing the Air Conditioner from the A storm window frame will not allow the air conditioner to Window tilt properly which in turn will keep it from draining properly. 1. Turn the air conditioner off and disconnect the power To adjust for this, attach a board or piece of wood to the cord. sill. The board or wood piece should have a depth of at 2. Remove the sash seal from between windows and least 1 1/2”.
CONTROL PANEL LAYOUT Electronic Control Panel & Remote Control Note: This control panel display always shows the room temperature in Fan Mode except when setting the temperature and timer. Normal Operating Sounds • • • • You may hear a pinging noise caused by water hitting the condenser on rainy days, or when the humidity is high. This design feature helps remove moisture and improve efficiency. You may hear the thermostat click when the compressor cycles on and off.
REMOTE CONTROL LCD Display MODE SLEEP FAN HIGH ENERGY SAVER FAN MED TIMER FAN LOW C/ F CHILD LOCK MYTEMP MODE Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries.
OPERATING INSTRUCTIONS 1. ON/OFF - Press the button to turn the A/C on or off. When the unit is turned off, the Timer function will be cancelled. The set temperature will be saved. 2. MODE SELECTION - Press the MODE button repeatedly to cycle between the different modes: Auto, Cool, Dry (Dehumidifier), and Fan. 3. TEMPERATURE SETTING - Press the ▼ button to decrease the temperature when the unit is on. Stop pressing the button when the desired temperature is displayed. Temperature range is 61⁰F-90⁰F.
USE THE AIR CONDITIONER 1. Freezing Conditions: This is a cooling only air conditioner. It is not designed for freezing outdoor 5. Fan Only Mode: Use Fan Only mode at High, Medium, or Low fan speed to provide air circulaconditions. It must not be used in freezing outtion and filtering without cooling. Since Fan Only door conditions. setting does not provide cool, a set temperature cannot be entered. The room temperature will 2. Remote Control: To ensure proper operation appear in the display.
USE THE AIR CONDITONER CARE AND CLEANING Clean your air conditioner to keep it looking new and to minimize dust build up. Air Filter Cleaning The air filter should be checked at least once every month to see if it needs cleaning. Trapped particles and dust can build up in the filter and may decrease airflow as well as cause the cooling coils to accumulate frost. To clean the air filter: 1. Remove the filter by pulling down on the indents of the filter door on the front of the unit. (See FIG. 5) 2.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS The Air Conditioner will not start The air conditioner is unplugged • Make sure the air conditioner plug is pushed completely into the outlet. The fuse is blown/circuit breaker is tripped. • Check the main fuse/circuit breaker box and replace the fuse or reset the breaker. • The unit will automatically restart when power is restored. There is a protective time delay (approx. 3 minutes) to prevent tripping of the compressor overload.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS Water is dripping outside Hot and Humid weather. • This is normal Water is dripping inside the room The air conditioner is not correctly tilted outside. • For proper water drainage, make sure the air conditioner is slightly tilted downward from the front of the unit to the rear. Water collects in the base pan Moisture removed from the air is draining into the base pan.
LIMITED WARRANTY Two Year Components Limited Warranty Five Year Compressor Limited Warranty Soleus N.A. warrants the accompanying Soleus Air Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for a period of TWO (2) years for components and FIVE (5) years for the compressor from the date of original retail purchase in the United States. If the unit exhibits a defect in normal use, Soleus N.A.
