User guide

GPS Tour
6.3.5. Press S5 while the chronograph is stopped to view your current data before
saving. Following are the information as you press S5:
6.4) Using HRM mode:
RUN mode & HRM mode has the same chronograph counter. When the chronograph is
started or stopped in RUN mode, the same thing happens in HRM mode.
You have to Link first you HRM belt in order to display the heart rate information to your
Watch. Go to HRM set mode/ LINK HRM to link the HRM belt. You only need to Link the belt
once. Once linked, the HR ID of the belt will be saved in the memory of the Watch.
How to turn ON the HRM function of the watch:
• While HRM is initially OFF, press & hold S5 in any mode to turn ON the HRM
function except when the Chronograph in any mode is STOPPED. In this case, you
will enter the GO BACK function of the watch.
• The watch will display HRM ON and the heart icon will start to blink until the HRM
signal is linked to the watch.
• Your HRM data will now be displayed in the watch.
• When you change the display by pressing S5 in any exercise modes, the watch will
auto turn ON the HRM function.
How to turn OFF the HRM function of the watch:
• While HRM is initially ON, press & hold S5 in any mode to turn OFF the HRM
function except when the Chronograph in any mode is STOPPED. In this case, you
will enter the GO BACK function of the watch.
• The watch will display HRM OFF and the heart icon will be auto turned OFF also.
• If HRM is OFF, the watch will not be able to receive the HRM signal from the HRM
belt.
!
6.4.1. How to enter HRM mode.
Press S7 to go to HRM mode and press S5, the watch will start to search GPS. Once the
GPS signal is received, the GPS GO screen appears and ready to begin your exercise.