Models SG-WAC-06ESE-C SG-WAC-08ESE-C Electronic Window Air Conditioner Operating Instructions V.
Thank you for choosing a Soleus Air powered by Gree Air Conditioner. This owner’s manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new air conditioner. For your own records, please attach a copy of your sales receipt to this manual.
ELECTRICAL REQUIREMENTS The electrical ratings for your air conditioner are listed on the model and serial number label located on the front left side of the unit (when facing the front). Specific electrical requirements are listed in the chart below. Follow the requirements below for the type of plug on the power supply cord. Wiring Requirements Electrical Shock Hazard Plug into a grounded 3 prong outlet. Do not remove the ground prong. Do not use an adapter Do not use an extension cord.
PACKING LIST 2/5” Screw (4) 4/5” Screw (6) Sash Lock (1) Packing List: • • • • • • • Window Air Conditioner Remote Control AAA Batteries (2) Top Mounting Rail Top Mounting Rail Seal Strip 2/5” Screw for Top Mounting Rail (4) Accordion Panels (Left & Right) • • • • • Sash Lock (1) Window Sash Seal 4/5” Screw for Window Locking Bracket & Accordion Panels (6) Foam Top Window Gasket Owner’s Manual 4
SPECIFICATIONS • Noise level is measured at a distance of 3.28 ft away from the front of the unit in cooling mode. • Power consumption is measured when the fan runs at the highest speed setting. • These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit. Model SG-WAC-06ESE-C SG-WAC-08ESE-C 1/115/60 1/115/60 6,400 8,000 Cooling Power Input (Watts) 600 740 Rated Current Cooling (Amperage) 5.6 7.1 10.7 10.
INSTALLATION & ASSEMBLY INSTRUCTIONS Some assembly is required for your new air conditioner. Please read and follow these instructions carefully. 1. This air conditioner is designed to be installed in a standard double-hung window with a window width between 22” and 36” (559 mm - 914 mm). 2. The air conditioner can be installed without the accordion panels to fit in a narrow window opening. See the window dimensions. 3. The Lower Sash (the lower part of the window that moves up and down) must allow for 13.
TOP RAIL INSTALLATION NOTE: Top Rail and the side Sliding Panels are offset to provide the proper pitch to the rear of (5/16”). This is necessary for proper condensation utilization and drainage. If you are not using the side panels, the rear pitch must still be maintained. 1. Remove the backing from the top mounting rail seal strip and attach the seal strip to the bottom of the top rail. Align along the front edge. 2. Attach the top rail onto the top of the outer case using the four 2/5” screws.
ASSEMBLY & INSTALLATION (CONT.) Placing the Unit Inside a Normal Window Accordion Panel Installation Now that you have installed the top rail, you can now install 1. Place the air conditioner on the sill with the bottom mounting rail against its back edge. Center the air conthe accordion panels on each side. ditioner and close the window securely behind the top mounting rail. The air conditioner should be slightly 1. Place the air conditioner on a hard flat surface. tilted to the outside area.
ASSEMBLY & INSTALLATION (CONT.) 4. To secure the lower sash into place, use the sash lock and a 4/5 ” screw as shown below (See FIG. 9) FIG. 9 IF AC is Blocked by a Storm Window A storm window frame will not allow the air conditioner to tilt properly which in turn will keep it from draining properly. To adjust for this, attach a board or piece of wood to the sill. The board or wood piece should have a depth of at least 1 1/2”.
USING YOUR AIR CONDITIONER Electronic Control Panel & Remote Control NOTE: This display always shows the room temperature in Fan Mode except when setting the Set temperature or the Timer When the light is on the unit is in temperature or timer set mode. 3. Temperature Set: Use these buttons on the control panel and remote to increase or decrease the Set Temperature (the desired room temperature) in cooling,energy saver and dry mode. The SET light will light up when setting the temperature 4.
OPERATING YOUR AIR CONDITIONER REMOTE CONTROL 1. ON/OFF - Press the ON/OFF button to turn the A/C on or off. When the unit is turned off, the Timer and sleep functions will be cancelled. The set temperature will be saved. 2. MODE - Press the MODE button to change the operating mode. You can choose AUTO, COOL, SAVE (energy saver), FAN only, or Dry (Dehumidifier). The temperature will not be displayed when AUTO mode is selected. 3. “—”- Press the “-” button to decrease the temperature when the unit is on.
OPERATING YOUR AIR CONDITIONER REMOTE CONTROL 9. LOCK/UNLOCK- Press the “+” and “—” buttons simultaneously to lock and unlock the remote control. When the remote is locked, none of the functions or setting can be changed using the remote. 10. F° or C° - To switch between the F° or C° settings, press the MODE and “—” buttons at the same time. 11. DISPLAY LIGHTS- Hold the “+” and FAN buttons to turn the light s on the display ON or OFF. This can be done when the unit is on or off. 12.
USING YOUR AIR CONDITIONER (Cont.) • Freezing Conditions: This is a cooling only air • conditioner. It is not designed for freezing outdoor conditions. It must not be used in freezing outdoor conditions. • Remote Control: To ensure proper operation when using the remote control, aim the remote directly at the signal receiver on the air conditioner. • The remote control has a signal range up to 20 feet. NOTE: Auto Fan Speed cannot be used in Fan Only mode.
CARE AND CLEANING Clean your air conditioner to keep it looking new and to minimize dust build up. Cabinet Cleaning To clean the air conditioner cabinet: • Air Filter Cleaning The air filter should be checked at least once every month to see if it needs cleaning. Trapped particles and dust can build up in the filter and may decrease airflow as well as cause the cooling coils to accumulate frost. To clean the air • filter: 1.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS The Air Conditioner will not start The air conditioner is unplugged • Make sure the air conditioner is plug is pushed completely into the outlet The fuse is blown/circuit breaker is tripped. • Check the house fuse/circuit breaker box and replace the fuse or reset the breaker. Power Failure • The unit will automatically re-start when power is restored. There is a protective time delay (approx.
TROUBLESHOOTING (CONT.) PROBLEM POSSIBLE CAUSES SOLUTIONS Water is dripping outside Hot and Humid weather. • This is normal Water is dripping inside the room The air conditioner is not correctly tilted outside. • For proper water drainage, make sure the air conditioner is slightly tilted downward from the front of the unit to the rear. Water collects in the base pan Moisture removed from the air is draining into the base pan.
Warranty Soleus International Inc. warrants the accompanying Soleus Air Air Conditioner to be free of defects in material and workmanship for the applications specified in its operation instruction for the period of parts specified below. 5 YEARS FOR COMPRESSOR 1 YEAR FOR OTHER COMPONENTS This warranty shall not apply to broken or marred cabinets, accessories, knobs, filters or routine maintenance.
