User's Manual

Pro Tools Tutorial
29
SSL UF8 User Guide
Channel Mode
Channel Mode allows you to access Sends A-E and the Pan of the selected track, all from one place. This is a unique UF8 control
feature, that utilises the touch-sense encoders to automatically switch send selection.
1. To enter and exit Channel Mode, press the CHANNEL key.
2. Select a track that you wish to control the Sends and Pans on using a SEL key.
3. Use V-Pots 1-5 to control Sends A-E or V-Pot 8 to control Pan.
Working in Channel Mode
• Channel Mode turns the SEL keys and LCDs purple to indicate that you're working in Channel Mode.
• All non-selected tracks are dimmed on the LCDs to make it clear that you're working with Sends & Pan on the selected track.
• The V-Pot readout bar, together with a bus name label will appear on screen whilst the V-Pot is being touched and revert to
the idle screen state 3-seconds after touch is released.
• Pre/Post States can also be toggled for each send using the corresponding Soft Key.
• Simultaneous adjustment of more than one V-Pot and FLIP mode are not possible in Channel Mode.
STEP 1 : Enter Channel Mode
by pressing the CHANNEL key.
STEP 2: Use a SEL key to
select a track.
STEP 3: Use V-Pots 1-5 to control Sends A-E and V-Pot 8 to control Pan.