User's Manual

Logic Tutorial

SSL UF8 User Guide

Logic with UF8 - Tutorial

The following tutorial guides you through configuring and using the default Logic profile on LAYER 1 of UF8. If you wish to configure

Logic on a different layer, please refer to the DAW Communication section of this User Guide to ensure your DAW is configured for

the correct SSL V-MIDI ports.

SSL 360° Setup

1. Open the SSL 360° application on your Mac or Windows computer and on the HOME page check that any UF8s you have

connected are present - outline images of each UF8 appear on screen.

2. If you have multiple UF8s connected, click down on the image of each unit to check that the UF8s are arranged in the correct

order. If units need to be re-ordered, then click and drag with your mouse to re-arrange.

3. Go to the UF8 page and set Layer 1 to Logic using the drop-down list.

Logic Setup

4. Open Logic. Go to Control Surfaces > Preferences... and then go to the Advanced tab. Make sure Control Surfaces is

ticked under Additional Options.

5. Within the same Preferences menu, go to the Control Surfaces > General tab and ensure that 'Multiple Controls Per

Parameter' is set to '1' and 'Only when all parameters fit one page' is unticked. Also, increase 'Maximum MIDI Bandwidth' to

100%.

6. Go to the Help Tags tab and ensure that 'Parameter name' and 'Parameter value' are both unticked.

STEP 1 : Open SSL 360° application.

Connected UF8s appear on-screen.

STEP 2 : Click and drag to re-order

units if necessary.

STEP 3 : Select the default Logic

DAW profile from the UF8 page.

STEP 4 : On the 'Advanced Tab', tick

'Control Surfaces' in the 'Additional

Options' section.

STEP 5 : On the 'Control Surfaces' >

'General' tab ensure that 'Multiple Controls

per Parameter' is set to '1' and 'Only when

all parameters fit on one page' is unticked.

Set 'Maximum MIDI Bandwidth' to 100%.

STEP 6 : On the 'Control Surfaces' > Help

Tags' tab, ensure that 'Parameter name'

and 'Parameter value' are both unticked.