User's Manual

Live Tutorial

SSL UF8 User Guide

V-Pot Assignment Modes

UF8 offers direct access to the Live's main Mackie Control V-Pot assignment modes. These V-Pot assignment modes are accessed

via the keys labelled below: 1. PAN, 2. SEND, 3. I/O, 4. PLUGIN.

1 - PAN

Assigns the Pan controls to the V-Pots on UF8. Pushing a V-Pot will default it to the centre position.

2 - SEND

Assigns the Send controls for the currently selected track to the V-Pots on UF8. Pushing a V-Pot will default the Send to off.

3 - I/O

Allows you to set the I/O settings for each track on the V-Pots. Pressing the I/O key repeatedly will cycle through the following

options: Input Type, Input Source, Output Type and Output Destination.

4 - PLUGIN (Devices)

Live's own instruments and also third party audio plug-ins can be controlled directly from UF8. Once you have pressed the PLUGIN

key to enter this mode, do the following:

• Select the track on which you want to control the plug-in.

• The name(s) of the plug-ins will appear in the LowLCD section of UF8's LCD(s).

• Push the V-Pot of the plug-in you wish to control.

• The parameters of the plug-in will be assigned across the V-Pots. Pushing a V-Pot defaults the parameter. You can also use

FLIP key to put the plug-in controls onto the faders.

• If there are more than 8 plug-in parameters, you can access them via the PAGE < > keys.

• Once you have finished, press the PLUGIN key again to return to viewing the names of the plug-ins you have on the currently

selected track.

2 3