User's Manual

Troubleshooting & FAQs
79
SSL UF8 User Guide
'SSL 360° Connection Lost. Attemping to Reconnect'
The LCD message above means that communication between SSL 360° and UF8 has been lost. If you experience this, then check
that your USB cable connecting UF8 and 360° has not been removed. Re-connect if so.
SSL 360° Software Messages
If the HOME page of SSL 360° is displaying the message 'NO DEVICES CONNECTED', then be sure to check that the USB cable
from your computer to the USB port on UF8 has not come loose.
If the HOME page of SSL 360° is displaying the message 'SOMETHING WENT WRONG... PLEASE EXIT AND RE-LAUNCH SSL
360°', then please quit SSL 360° and re-launch. If that does not work then restart your computer.