User's Manual

Safety Notices
81
SSL UF8 User Guide
Safety Notices
General Safety
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that
produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of an obsolete outlet.
Protect the adapter and power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
Only use the attachments/accessories recommended by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
Do NOT modify this unit, alterations may affect performance, safety and/or international compliance standards.
SSL does not accept liability for damaged caused by maintenance, repair or modification by unauthorised personnel.
Installation Notes
When using this apparatus place it on a secure level surface.
Always allow free flow of air around the unit for cooling. We recommend the use of rackmount kit available from SSL.
Ensure that no strain is placed on any cables connected to this apparatus. Ensure that all such cables are not placed where
they can be stepped on, pulled or tripped over.
WARNING: To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture.
ATTENTION: Afin de réduire les risques de choc électrique,ne pas exposer cet appareil à l'humidité ou à la pluie.
Power Safety
UF8 is supplied with an external 12 V DC desktop power supply with a 5.5 mm plug to connect to the unit. A standard IEC
mains lead is provided to power the DC supply however if you decide to use a mains cable of your choice, bear in mind the
following:
1) The adapter power cord should ALWAYS be earthed with the earth on the IEC socket.
2) Please use-compliant 60320 C13 TYPE SOCKET. When connecting to supply outlets ensure that appropriate sized
conductors and plugs are used to suit local electrical requirements.
3) Maximum cord length should be 4.5 m (15').
4) The cord should bear the approval mark of the country in which it is to be used.
Connect only to an AC power source that contains a protective earthing (PE) conductor.
Only connect units to single phase supplies with the neutral conductor at earth potential.
Both the mains plug and appliance coupler can be used as the disconnect device, ensure that the mains plug is connected
to an unobstructed wall outlet and is permanently operable.