User's Manual

Page 5
Channel Pan, Fader Cut & Solo
At the base of the X-Desk channel strip you will find traditional analogue
desk functions.
The channel stereo “PAN” control, which controls the channels
LEFT/RIGHT positioning on the Stereo Mix bus.
The analogue signal level FADER, for feeding the Stereo Mix Bus or
controlling the CH OP (Direct Channel Output) level.
Above the Fader you will find two switches:
The “SOLO” switch, which mutes all other channels and provides an
AFL monitoring signal, and finally the “CUT” switch which immediately
mutes the channel’s output.
X-Desk Channel Strip