User Manual
SiX User Guide
Appendix B
30
Overall Channel Signal Chain Specications
Signal applied to Line Input of a mono channel, and routed to specied output by shortest path. All controls set at, out or at unity
gain as appropriate. Pan set to full left or right.
Measurement Conditions Value
Foldback, B-Bus & Main Output
Output Headroom into 600Ω at onset of clipping
into 10kΩ at onset of clipping
>24dBu
>27.5dBu
THD+Noise +20dBu @ 1kHz (lter 22Hz to 22kHz) < 0.0015%
Frequency Response 20Hz to 20kHz
-3dB high rolloff
+0.1/-0.3dB
>100kHz
Output Impedance 100Ω
Pot centre detent accuracy: +/-1dB, typically <0.5dB
Overall Console Noise
Measured at main outputs, channels routed as required with pans / balance controls centred, using Line input with termination. All
controls set at, out or at unity gain as appropriate, channel and master faders calibrated for 0dB.
Measurement Conditions Value
Noise at Main Output 1 mono channel routed (all other muted)
All channels routed
<-90dBu
(<–116dB with respect to +26dBu)
< –85dBu
(<–111dB with respect to +26dBu)
Environmental Requirements
Temperature range:
Operating: +1 to 30 degrees Celsius.
Storage: -20 to 50 degrees Celsius.