User's Manual

Confidential & Proprietary 65/136
2. VHF/UHF & 700LTEF
RX OUT
Terminal for transmit the signal of RX to existing ROU
ROU
3. Power Port
Terminal for input either AC 110V or DC-48V as internal
PSU type
4. VHF/UHF TX OUT
700LTEF MIMO ANT
Terminal for radiate the signal of TX to TX Antenna
To/From
Antenna
5. VHF/UHF RX IN
700LTEF SISO ANT
Terminal for receive the signal of RX from RX Antenna
6.External Port Port for communicate with existing ROU
7.GND LUG PORT Terminal for system ground
POWER PORT
Power ports are used for power-supplying of -48V DC or 120V AC, and specific power
cable should be applied to each different types of ROU power supply (AC/DC or
DC/DC). Below figure is naming of the power supply by type.
Exteral PORT
External ports are reserved ports for external equipments for future implementation,
and used to monitor the status and control the equipments.
Below figure is naming of the external ports.