User's Manual

Confidential & Proprietary 108/136
Check if the connection is the same as one seen in the table above and make sure before turn
the power ON. If you want to turn on the power of AOR, move PSU’s circuit break switch to
“I”status
Check if the POWER LED indicator on the AOR PSU is green lights status
Information of LED at the front RDU
When power of AOR is turned on, LED of the PSU front panel shows the following
information:
5.5.3 GND Terminal Connection
AOR has one GND terminal port where is on rear side, like below
LED Description
ON
Power is not supplied
Power is supplied.
ALM
Normal Operation
Abnormal Operation