User's Manual

Confidential & Proprietary 133/139
main window of ROU, you can inquire and set the status of a corresponding RDU module.
Set HPA of a corresponding RDU as “ON.” Use TX OUTPUT AGS function and set it as a
desired output level.
The table below shows maximally available Composit Powerlevels that can be set per band:
RDU Band Power that can be
maximally set
Setting range
700PS 23dBm 0 ~ 23dBm
700LTEC 23dBm 0 ~ 23dBm
800PS 23dBm 0 ~ 23dBm
850Cellular 23dBm 0 ~ 23dBm
900I+Paging 23dBm 0 ~ 23dBm
1900PCS 26dBm 0 ~ 26dBm
AWS-1 26dBm 0 ~ 26dBm
VHF 24dBm 0~24dBm
UHF 24dBm 0~24dBm
AGS function enables you to adjust output power as you like. While the AGS function is being
executed, the Result window shows "Processing" and then a result value. There are three types
of results as follows:
A. Success: The AGS function is normally made.
B. Not Opterate OPTIC Comp: Optic Comp is not executed.