Manualshelf

User's Manual

ManualsBrandsSOLiD ManualsComputers & AccessoriesALLIANCE DAS
31323334353637383940
The procedures are
1.
Remove dummy bolt attached at FAN Port
2.
Connect internal FAN cable to the FAN Port, and connect with the connector located on the top
of PSU.
3.
Install fan unit to the bottom of 5W remote with aligning heatsink pin to the guided groove.
4.
Secure the fan unit by tightening M6 screw located on the leftcorner.
5.
After securing the FAN Unit, connect the cable from FAN unit to FAN port.
Confidential & Proprietary
35/39